DAIKIN SKY AIR FFA-A
33,000.00 €
- Description
- Additional information
- Product Features
- Technical Information
- Catalog
- Contact
- Certificates
Presence & floor sensor The presence sensor directs the air away from any person detected in the room, when the air ow control is on. The floor sensor detects the average floor temperature and ensures an even |
|
Home leave operation Maintains the indoor temperature at your specified comfort level during absence, thus saving energy |
|
Draught prevention When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired. |
|
Individual flap control Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well. |
|
Inverter Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures. |
|
Fan only The unit can be used as fan, blowing air without heating or cooling. |
Color | white & grey panel |
---|
Product Features
- Fully flat integration in standard architectural ceiling tiles, leaving only 8mm
- Remarkable blend of iconic design and engineering excellence with an elegant finish in white or a combination of silver and white
- Combining with R-32 Bluevolution technology, reduces environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has up to lower 16% refrigerant charge
- Two optional intelligent sensors improve energy efficiency and comfort
- Individual flap control: flexibility to suit every room
layout without changing the location of the unit! - Unified indoor unit range for R-32 and R-410A
- Reduced energy consumption thanks to specially developed small tube heat exchanger, DC fan motor and drain pump
- Optional fresh air intake
- Branch duct discharge allows to optimize air distribution in irregular shaped rooms or to supply air to small adjacent rooms
- Standard drain pump with 630mm lift increases flexibility and installation speed
Contact
Setup a meeting with Sales: